Mines ECU for Free!!!!
08 February 2003, 01:38 PM
#1
Scooby Regular
Thread Starter
Join Date: May 2002
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
I will swap a Mines Ecu (runs 0.9bar) for a standard ECU, suitable for a 1993/4 WRX.
You wont get a better deal than that this week!
(Note the ECU is suitable for a ealry WRX)
You wont get a better deal than that this week!
(Note the ECU is suitable for a ealry WRX)
Trending Topics
08 February 2003, 06:59 PM
#8
You can return the ECU to standard by removing the Mines ECU board, and connecting the Jumper J1 (wire link) which will have been cut to switch to the Mines eproms.
You can sell the Mines part seperately, or transfer it to another pre97 car.
Paul
You can sell the Mines part seperately, or transfer it to another pre97 car.
Paul
09 February 2003, 04:42 PM
#10
Scooby Regular
Thread Starter
Join Date: May 2002
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Pavlo. I know what you are saying, but i would rather somebody got the Ecu Ready chipped and i got s standard ECU back.
Bonsey, you were first so do you want it?
If not, Legacy bear you are next in line.
Bonsey, you were first so do you want it?
If not, Legacy bear you are next in line.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM