JDM (T20) Cobra Alarm Key fob reset
#1
JDM (T20) Cobra Alarm Key fob reset
I have the Cobra 7925 fitted to my T20.
I have changed the battery to one of the fobs, but it isn't working. Can anyone help with a reset process or similar please?
If you're reading, Iain?
I have changed the battery to one of the fobs, but it isn't working. Can anyone help with a reset process or similar please?
If you're reading, Iain?
#2
Scooby Regular
Join Date: Jun 2004
Location: Old Detroit aka Chippenham
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
Stand close to the car and press and hold down both buttons until the LED on the remote key goes out - approximately 10 seconds.
Release both buttons - the LED will come on constantly.
Then press larger button for approximately 1 second - the LED will flash - this should complete resynchronisation.
Release both buttons - the LED will come on constantly.
Then press larger button for approximately 1 second - the LED will flash - this should complete resynchronisation.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
toyney83
General Technical
10
02 October 2015 08:38 PM