office network using sage

feargal · 02 July 2009, 12:26

Hi to all could anybody please give me a step by step approch to setting up an office network using sage so all computers can access accounts and update them Thank You

**ChrisB** · 02 July 2009, 12:29

There could be an lot of steps involved.

What do you have (equipment wise) already?

BlkKnight · 02 July 2009, 15:22

Bizarre 1st post, but hi.

Your going to need a multi user install of sage - if you've not got the licenses for it, you won't be able to do so.

It's pretty straight forward really. Open up a network share on the master PC (where Sage resides). Set a map to a drive on client machines (or can do through UNC). Run the sage netsetup on the client machines and you are done!

If using more than 3 users & you have a fairly big Database (on a standard machine) performance will be shocking when doing sorts.

feargal · 04 July 2009, 14:42

To BIKKNIGHT
THANK YOU FOR YOUR HELP I WILL TRY IT I HAVE GO SAGE WITH A LICENSES BUT IM NOT SURE IF IT IS MULTI USER THANKS AGAIN