vicz84

Anyone got some advice to lend me, i need to fit a R-spec 3 port boost solenoid to my 2003 blob eye wrx and need some fitting instructions or diagram. the boost solenoid I've got is from ebay item no 221484947871. Thanks

Dubzy

iTrader: (4)

If you currently have a 2 port solenoid then you will need a remap for this and its usually fitted by the mapper at time of mapping. If you already have a 3-port and your swapping like for like then port 1 is left open with no connection or you can vent back to air intake. Port 2 goes to the nipple on the wastegate actuator and port 3 goes to the nipple on the turbo. I have one waiting to be fitted in the next week.