MY98 PPP Parts
#1
Scooby Senior
Thread Starter
iTrader: (1)
Join Date: Jun 2002
Location: Notts
Posts: 1,158
Likes: 0
Received 0 Likes
on
0 Posts
MY98 PPP Parts
OK guys
Have back box and centre section fitted from PPP, have samco turbo hose set, and have now got a PPP ECU (still to be fitted).
Is there anything else I need to source and change in order to replicate a dealer install of the PPP on an MY98 UK Turbo ?
Have back box and centre section fitted from PPP, have samco turbo hose set, and have now got a PPP ECU (still to be fitted).
Is there anything else I need to source and change in order to replicate a dealer install of the PPP on an MY98 UK Turbo ?
#2
Do you have the high flow cats ?
From comments, the PPP conversion spools up much quicker than standard and this is probably down to the reduction in exhaust backpressure.
Oh, and the uprated fuel pump.
Hum, just read your post fully
I was thinking of an 03 STi
From comments, the PPP conversion spools up much quicker than standard and this is probably down to the reduction in exhaust backpressure.
Oh, and the uprated fuel pump.
Hum, just read your post fully
I was thinking of an 03 STi
Last edited by Gary C; 10 March 2004 at 10:35 AM.
#3
Scooby Regular
Join Date: Jul 2000
Location: Lancashire
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
You may already know this, but MY97/98 ECUs need to be recoded for a particular set of keys, otherwise the immobiliser will never switch off.
You'll need access to a Select Monitor to do this.
Andrew...
You'll need access to a Select Monitor to do this.
Andrew...
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM