MY98 UK Turbo 2000 DV HELP!!!

dgbeard · 02 July 2009, 19:33

I have a 98 'S' UK Turbo 2000 and want to fit an aftermarket dump valve. I ordered a forge one but the kit is made for 93-95. Phone them and they say the kit fits 93-99 but it wont (not that good with stuff like this!). Any help would be greatly appreciated from newby eg how to fit or what have you fitted
+FORGE DUMP VALVE & FITTING KIT SUBARU IMPREZA 93-99+

TingTongPJ · 02 July 2009, 20:10

how does you re-circ one fit at the moment ?
do you have a pipe that comes off the intercooler or does it bolt onto the intercooler.

if your not sure post a pic of your engine bay and people can help you easily. fitting one is a dodle.

dgbeard · 02 July 2009, 20:27

The re-circ one has a pipe that comes off the intercooler

TingTongPJ · 02 July 2009, 21:26

the one in your link will fit no problems.

here's an idea of how it fits, my old one was on a my98 with a st8 intercooler. i've now moved to a front mount.

dgbeard · 02 July 2009, 21:51

Been out headscratching again!!! Pipe to blank off the old recirc pipe doesn't fit its too small (samco hose supplied with blanking plug) and the pipe that comes from intercooler is too large to fit on the forge entry - the turbosmart one in the pic has a much bigger entry (If that makes sense - sorry if I am being a bumb ass!)

TingTongPJ · 02 July 2009, 22:08

the bottom pipe that dissapears via the block at the bottom you blank off, then atach the dump valve to the outlet on the intercooler, the thinner pipe goes from the dump valve into the manifold.

dgbeard · 03 July 2009, 22:36

Thanks for your help TingTongPJ got it sorted bought an HKS Super SSQV from Sumo Power and will send the other one back as the fittings were all wrong.