Fuelab fpr, where have you mounted it...

[Bicco]

Got a fuel lad fpr to fit this weekend, pipewrok is dead straight forward etc, just wondering where people have actually mounted the reg, can`t find a gap big enough! The car is a blob STi running standard top mount and standard battery, only thing i can think of is swapping to a smaller bat! Where as evveryone put thiers?

[bigbarry04]

i have seen alot of people put them where the top mount ic sits but that is running a fmic. so i would also be interested in what other people suggest.

[joz8968]

Bicco, you can get the "Mini" version of the Fuelab (costs about £10 more than the regular one). That version might afford you more space.........?


The bottom 2 are the "Mini" versions of the 2- and 3-porters, respectively:-

http://lateralperformance.co.uk/sect...a654200ccdb003

[Bicco]

bit late.... Already here waiting to go on! Gonna have abother look tonight, £100 for an odyssey with posts seems steep just to fix a packaging issue.

[wrighty338]

just here



Theres loads of places to put them, just use your imagination, if there isnt somewhere to put it, make a space to put it. couple more pics here

http://bbs.scoobynet.com/members-gal...pr-fitted.html

good luck

[Butty]

Put it somewhere safe is the main point.
The bulkhead or chassis leg are stronger points, out of the way in a frontal crash.
Putting it forward of the engine will allow fuel to spray down on to the exhaust manifold when it gets ripped off.

[joz8968]

Originally Posted by Bicco

bit late.... Already here waiting to go on! Gonna have abother look tonight, £100 for an odyssey with posts seems steep just to fix a packaging issue.

What I perhaps should have added was: sell yours, get the Mini.

But as above, you should "easily" be able to find a place for it to be mounted, regardless...