I've had a fibreglass front splitter off Mark at HT AUTOS for quite a while now. It's done exactly what it said on the tin, it's black, it's stayed on the front of the car, and it looks damn fine! :)
http://www.scoobysmacs.co.uk/gallery/upload/userfiles/old-splitter.jpg (http://www.scoobysmacs.co.uk/gallery/upload/userfiles/old-splitter.jpg)
However, not long after buying it, I did manage to hit a kerb
http://www.scoobysmacs.co.uk/ibin/damage-splitter-large.jpg (http://www.scoobysmacs.co.uk/ibin/damage-splitter-large.jpg)
which was not good. Mark was kind enough to replace it, foc, and my lesson was duly learned. I want be parking as close to kerbs in the future.
(He doesn't normally offer a replacement if you trash yours, so don't ask! :D)

Anyway, I was happily going about my life when Mark calls me up out of the blue, all excited :) He's now got a new machine that makes his front splitters much better than ever before. So a trip over was planned.
After watching how one of these is put together, I could see for myself how much better the process was than old fibreglass. Then Mark passed a freshly made one to me.............................HOW BENDY! :D
The old fibreglass ones are very stiff, hence the reason they break if you kerb them, these new POLYURETHANE BLACK PLASTIC ones are so much more flexible, and by default, much more resistant to kerbing.
So, for evaluation purposes, and a bit of field testing, I've secured one of the first ones to come off the production line (thanks again Mark :))
Here are a few pictures of it:
http://www.scoobysmacs.co.uk/gallery/upload/userfiles/htautos1.jpg (http://www.scoobysmacs.co.uk/gallery/upload/userfiles/htautos1.jpg)
The ht autos logo, tastefully imprinted on the side spat
http://www.scoobysmacs.co.uk/gallery/upload/userfiles/htautos2.jpg (http://www.scoobysmacs.co.uk/gallery/upload/userfiles/htautos2.jpg)
the full splitter on our front grass.
http://www.scoobysmacs.co.uk/gallery/upload/userfiles/htautos3.jpg (http://www.scoobysmacs.co.uk/gallery/upload/userfiles/htautos3.jpg)
that side logo again, a bit arty this time :D
http://www.scoobysmacs.co.uk/gallery/upload/userfiles/htautos4.jpg (http://www.scoobysmacs.co.uk/gallery/upload/userfiles/htautos4.jpg)
the full splitter again, on the rocks :)

Fitting was a doddle, once I'd taken the old one off. All holes line-up with the orginal holes on my MY03 STi. Mark supplied me with fitting bolts, but I used the ones that were already holding my old one on.
And here it is, all fitted and ready to do what the front splitter does best:
http://www.scoobysmacs.co.uk/gallery/upload/userfiles/fitted1.jpg (http://www.scoobysmacs.co.uk/gallery/upload/userfiles/fitted1.jpg)

http://www.scoobysmacs.co.uk/gallery/upload/userfiles/fitted2.jpg (http://www.scoobysmacs.co.uk/gallery/upload/userfiles/fitted2.jpg)

http://www.scoobysmacs.co.uk/gallery/upload/userfiles/fitted3.jpg (http://www.scoobysmacs.co.uk/gallery/upload/userfiles/fitted3.jpg)

http://www.scoobysmacs.co.uk/gallery/upload/userfiles/fitted4.jpg (http://www.scoobysmacs.co.uk/gallery/upload/userfiles/fitted4.jpg)

So, finally, to the prices :)

STi V-LTD FRONT SPLITTERS MY03 - 05 £99 INC VAT
P1 FRONT SPLITTERS MY99 - 00 £99 INC VAT
DELIVERY: UK £10, HIGHLANDS & ISLANDS/N.IRELAND £20

Mark is also working on STi winglets and fog covers made using the same process for newage cars. Check out the website for details of other products in the pipeline Welcome Page (http://www.htautos.co.uk)
This is a limited time offer, so don't delay, treat yourself for the summer :)
Give Mark a call on 01663 741796

Put me down for one of these please. Just let me know when and where to pay!

Cheers

Dan - 53 plate STI UK

Nice one Cocker, give Mark a call tomorrow morning on 01663 741796 and he'll sort you out :D

I went and picked mine up today. Fantastic quality and seemingly impossible to break ( it was bent in half infront of my eyes to prove this:eek: ) They are a snip at this price and are the only company making them in this material.

Gav..:)

Just ordered one - 1st mod on its way!!!!

Typical, I wait and wait, give up and buy the geniune STi winglets and he goes and develops his own!

Really tempted by one of these though! Cracking price (excuse the pun ;) )

Anything for the WRX 2003?

Anything for the WRX 2003?
Any chance of one for a blobeye WRX as i've split and had to repair my Scott Lowe fibreglass one twice :(

one for a prodrive styled bug eye would find a buyer........ ie me :luvlove:

This sounds good, need check my funds, I had a fibre glass one which the wife decided to ram into a few kerbs! Repaired numerous times until it was beyond repair! This sounds great, simillar to a genuine one? :thumb:

Can these be sprayed up or not ?

Can these be sprayed up or not ?

No problem!:thumb:

what would the cost be if he sprayed them? How long will this be going for?

Any ideas of how long for the STi winglets?

Would like to order the spliter but need a set of winglets aswell!

Steve

I want one for WRX blobeye but no one seems interested in making them for anything else than STI's

Any ideas of how long for the STi winglets?

Would like to order the spliter but need a set of winglets aswell!

Steve

Winglets are ready now, just waiting for rubber strips:thumb:

what would the cost be if he sprayed them? How long will this be going for?

Davethebutcher can answer that one :D

Looks like the credit card will be out tommorow then
Cheers
AC

I want a bugeye WRX one..

Winglets are ready now, just waiting for rubber strips:thumb:

Whats the approx cost for the winglets??? Then maybe some WRX owners could join the group buy!

Thanks

Steve

Would they make them without the logos in view?

:thumb:

have u got a pic for the p1 splitter as there isnt one one the web site

http://i81.photobucket.com/albums/j224/htautos/DSC01503.jpg

Looks like the credit card will be out tommorow then
Cheers
AC

DONE,

many thanks Mark

AC:)

Just brought a P1 Splitter today and just seen this deal!!!!!!! :(

GUTTED!

Now working on tooling for 06 V-LTD lip!:thumb:

Just brought a P1 Splitter today and just seen this deal!!!!!!! :(

GUTTED!

From HT Autos, forgot to add!!!!!

Shame I didn't see this thread :cry:

Now working on tooling for 06 V-LTD lip!:thumb:

:luxhello: When will you be doing your P1 pre-facelifted splitter :thumb:

The old fibreglass ones are very stiff, hence the reason they break if you kerb them, these new POLYURETHANE BLACK PLASTIC ones are so much more flexible, and by default, much more resistant to kerbing.
So, for evaluation purposes, and a bit of field testing

When are you planning to kerb this one then :lol1:
Splitter does look the dog's :thumb:

Hopefully never DJ73 :D

Went over and picked one up yesterday.

Me being me couldn't wait to fit it, so I got a bit wet, but it was worth it.:thumb:

Just got to watch the speed humps now.