Group BuysPost your Group Buy and subscribe to existing group buys here!
Welcome to ScoobyNet.com!
Welcome to the ScoobyNet.com Subaru forum.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
The one in the link you showed is the fuel pressure combo.
The gauge is included in the price with a sender but I would think the fuel regulator is extra £38.00 (less 20%). I have sent an email will let you know when I get a reply.
The listed retail price of the gauge kit before any discount has now gone up to £99.90 If you want to contact him maybe he will knock the difference off.
Yes the regulator is £38.00 extra but you can have 20% off that. You need to email them direct as to how to order/pay for it.
The price has gone up slightly due to shipping costs and the exchange rate but with the discount its only a £1 or so.
Ive had an email saying they dont have the boost gauge!!!! Ive been offered a different gauge of my choice! I thought this was for a Boost,Oil temp and Oil press combo! Slightly confused now! Also says if i pay more i can have a boost gauge!
Did i order the wrong items or something? Ifollowed the instructions in the PM that Baz sent out!
Unless they are out of stock of the perticular one we ordered. Baz said the stocsk was low. They maybe offereing you a better one for a little extra. Email them back and see what the score is and let us know
Now i have just sent an email to these guys with a link to this page to show the numbers buying gauges and have asked if there is anything he can do with price?? Hope you dont mind me doing this RBAZ?? i can pass the details to you if you like??
Will update tomorrow if i hear something, but even if no they work out the same price as the ones in the uk but as you can see fit the original holes with proper mounting points and have a steel cage.
Now you can also just buy the pod with is 1/2 the price and look at fabricating your own faceplate, which is what i think i may do, as its only a flat piece of plastic/ally/carbon fibre with 3 holes cut to size, and if your really skillfull you could even angle them towards the driver.
See what you think.
UPDATE ON SCOOBYTUNER PODS.
I've just spoken to Chris at Scoobytuner in the USA. I commented to him about the packing and shipping price that came up on their site of $121 to the UK !!!
He believes he can post via the USA postal service for about $70 max. That would be the post cost for probably 1 to 3 pods.
I'm really interested in this pod over the fibreglass ones so if anyone else is interested perhaps I can contact him on our behalf to negotiate a better price for the pod and we could share the post/packaging cost? The pods would need to be posted to one address so some trust would be needed on this point.
Ive had an email saying they dont have the boost gauge!!!! Ive been offered a different gauge of my choice! I thought this was for a Boost,Oil temp and Oil press combo! Slightly confused now! Also says if i pay more i can have a boost gauge!
Did i order the wrong items or something? Ifollowed the instructions in the PM that Baz sent out!
PM sent think you have ordered the wrong ones
Drop Danny an email he will sort it out
Molbyman, this is the gauge pod that i am after really mate, looks a lot better in my eyes, think i will only buy the gauge pod though for $79 as the kit only inculudes the faceplate and some clips to hold the gauges in the pods, im sure i can fabricate something to suit this, and some jubillee clips or cable ties on the back of the gauges hold them securly enough so dont see how they can justify almost double the price, what do u think??
Deva, yeh i know they clip in but i want something a bit different really, hence why i think the scoobytuners one has caught my eye. Thanks for confirming though, im sure this would help some other people, as i would seriously recommend not using the fibreglass ones.
Just so noboby is put off my my post above! I ordered the wrong gauges because im a muppet lol. Thanks Rbaz all sorted and sent Danny an email to confirm!
Does anyone have any links I can look at with pods for the flat MY97 dash. All the ones I can find are to replace the centre cubby hole, not much use if you dont have one.
Does anyone have any links I can look at with pods for the flat MY97 dash. All the ones I can find are to replace the centre cubby hole, not much use if you dont have one.
I have never seen that scoobymania pod before. But I can't help thinking that the guages are going to be a bit "in your face" located there. I have my current boost guage located right in that corner, three guages even more to the centre will be too much.
I know what you mean about the JW racing pod too. It does look a bit "stuck on" and generally a bit awkward and out of place.
Why can no-one make a nice pod for the early dash
I may have to look at housing them in the heater vent. But that was going to be for my AVCR.
I have never seen that scoobymania pod before. But I can't help thinking that the guages are going to be a bit "in your face" located there. I have my current boost guage located right in that corner, three guages even more to the centre will be too much.
I know what you mean about the JW racing pod too. It does look a bit "stuck on" and generally a bit awkward and out of place.
Why can no-one make a nice pod for the early dash
I may have to look at housing them in the heater vent. But that was going to be for my AVCR.
I really do not want to go down the heater vent route!
I think the scooby mania pod might not be to bad... but can anyone find a pic of one fitted?
I've just spoken to Chris at Scoobytuner in the USA. I commented to him about the packing and shipping price that came up on their site of $121 to the UK !!!
He believes he can post via the USA postal service for about $70 max. That would be the post cost for probably 1 to 3 pods.
I'm really interested in this pod over the fibreglass ones so if anyone else is interested perhaps I can contact him on our behalf to negotiate a better price for the pod and we could share the post/packaging cost? The pods would need to be posted to one address so some trust would be needed on this point.
Let me know if your interested.
I have e-mailed Chris at Scoobytuner tonight to see if we (h4rry + coco08) can get a discount on the pods. I have also asked what the post/packing cost will be if all 3 pods are sent to my address in Worcs.
I have advised Chris that h4rry requires the gauge pod only at $79.00.
coco08 - you would need to choose the front plate you want, brushed aluminium, black or carbon fibre (+$29.95 for carbon fibre).
Is that your gauges been shipped? My status is still showing as processing even tho I was one of the first to pay! GGRRRRRRRRR!!!
How do you know you where one of the first to pay? Others might have ordered before posting on here I know I did.
I have been assured that the orders will be sent on first come first serve basis. I also know he is out of stock on certain gauges so if you ordered something different to the Std 3 gauges in PSI that may be why or there was just more people in front of you.
I do know he was low on stocks and a new delivery is due within a couple of weeks, we are just going to have to be patient they are worth waiting for at this price
If you want to contact him maybe he will knock the difference off.
