Excuse me if this info is wrong or of no use, but my motor is getting some mods done at the moment so I can't check for you!
I'm not sure what model my AddZest is but it is grey in colour with the volume control on the right; volume controled via a dial.
From memory I have a clock button (marked "CLK") on the left of the unit. This should be the only button you need to set the clock. Push and hold this for a couple of seconds to get the time flashing (either the hours or minutes will flash).
Pressing the button again will advance either the hours or the minutes (can't remember which). When they are set, wait a couple of seconds and the other will flash. Pressing the button again will set these. Then leave for a couple of seconds and that should be it!
I apologise if my unit isn't similar. If it is then hopefully my instructions are enough to put you on the right track.
Hope this helps,
Kevin
|
