Now, I know this has been done in detail a whole ago but I want to make sure mine are OK for TRAX next weekend. Can someone say if my rear points are correct for a 3-pointer. Here are some pic... http://secret.lab6.com/uploaded_files/998821657.jpg

Also is this correct for the driver's side
http://secret.lab6.com/uploaded_files/998821697.jpg

With the other drivers point do I need to cut the carpet to get access to the seat belt harness point or can it go on the seat mount like this
http://secret.lab6.com/uploaded_files/998821524.jpg
or like this
http://secret.lab6.com/uploaded_files/998821797.jpg http://secret.lab6.com/uploaded_files/998821761.jpg

Thanks for your help.

Tim


[This message has been edited by Tim Taylor (edited 26 August 2001).]

Tim, pics dont work.

For the waist belts I have used the bolt hole the seat is connected via in the centre, and the standard seatbelt bolt behind all the cosmetics. As for the rear I cant help. Not sure, as I have the four point harness.

Dan

Do the pics work now?

..I have a concern re the final pic - is that just thru the bracket and capped off?? if so the bracket will shear off .... why not replace all ur normal bolts with the eyebolts like I did....very secure and easy to do....mail me and I'll have a look at trax b4 u go out if ya like