When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Im having trouble getting my headlights to "flash" or stay on "high beam" Ive replaced the relays and its now bought me to this stage
If i have the head lights on as normal if your driving threw town at night time this is how my lights are
Passenger side
Driver side
If i flick the "high beam" on this is what happens
Now im thinking the high beam and normal beam are the opposite way round as it would appear. Does anyone have any ideas on what to do. Ive checked the wiring on both sides and they appear to be identical
I had to change the relay as it had gone in the 1st place..... Its like i say i can only think there back to front as thats whats happening. Did you wire it up the same way as in the diagram you added then it was all good??
I had to change the relay as it had gone in the 1st place..... Its like i say i can only think there back to front as thats whats happening. Did you wire it up the same way as in the diagram you added then it was all good??
yes i followed the diagram and there was a wire wrong, try swapping the two spade connectors around in the main beam part
Check the fuses for the headlights on the car: I've seen similar when one fuse goes.
Just checked the fuses and there all good so not the fuses, relays been replaced. I'm gonna take a picture of all the wiring tomorrow in case I'm missing something
Last edited by Bean1984; 15 March 2013 at 05:47 PM.