i have finally decided to get off my backside and do the work if been wanting to do for ages
work im doing myself in the garage at home

hyperflow monster FMIC AET great company (andy taylor MD real quick service)
hyper flow TM oil cooler AET great service/and very helpful. i will be using andy knowledge on the turbo etc later on in the project.
hyperflow induction kit AET great service
hyperflow catchcan on battery bracket AET great service fitted by me
aim MXL strada digital dash AET turbos
E Boost 2 boost controller AET turbos
TEIN mono flex coilover suspension TSL good company fast service fitted by me
EDFC control system for suspension TSL fitted by me
TEIN front strut brace TSL/me
TEIN rear strut brace TSL/me
tar-ox brake grande 12 pot front/ 10 pot rear/ stainless lines new discs etc revolution
front and rear sway bars TSL/me
S.E.C.S Data monitor with VFD
carbon wing mirrors scooby parts
stainless rad cooling plate badass
stainless fuse box badass
stainless brake and clutch covers bad ass
carbon b pillar covers scooby parts
front splitter E.M.B neil cracking bloke fitted by me raffle prize NBO cheers neil
carbon bonnet revolution
chargespeed carbon fibre air intake replacing foglight covers revolution
nitrous wizards of oz streetfighter 150 thor racing
morette rear light cluster revolution
morrette front light cluster revolution
fantastic wiring performed by myself
fully flocked wrc style dashboard with a litte bit difference to others i have seen ( more on that later) CBC banbury
door cards and b pillar flocked cbc banbury
carpets changed dying them black with valeters dye
new front seats, corbeau boss seats revolution
full four point seat belts revolution sabelt
two fire suppression systems 1 interior 2 engine bay demon tweeks and
custom made panel to mount rear subwoofers, fire extingishers seatbelts etc will be flocked when i have designed it
swoosh gauges 7 of them, sorry like the look of them, defis also but going to be different and fit the swoosh fitted by me
zero sports triple pod japan parts done by me
perrin drop links front and rear TSL done by me
perrin anti lift kit TSL done by me
move the clock into the front grill done
buddy club condenser revolution
underseal all exposed areas whilst wings etc are off/done
roof vent
new tubular headers ceramic coated fitting me
fit EDFC controller in ashstray custom build me/ done
work im not doing is ( TSL motorsport ) are
upgrade to 353 bhp
upgraded exhaust system
alloy hand polishing by R+S in manchester
wheel laser alingnment for the suspension
thanks to glen and keith and the rest of the crew at revolution
remap jolly green monster thanks simon
and anything else that i can think off mick

1st pic headlights out
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1593.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1593.jpg)
2nd pic sump plate removed to give me totall access allready removed the bonnet as well


http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1596.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1596.jpg)
3rd pic front wheels off and most of the little plastic bolts that hold the front bumper on
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1598.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1598.jpg)
4th inner wing removed as i am removing the front wings
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1600.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1600.jpg)
front bumper is off
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1603.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1603.jpg)
pic of the front of the car
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1605.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1605.jpg)
airduct system on the inner wing can be seen this will be removed not needed
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1612.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1612.jpg)
wings off starting to dismantle the suspension
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1614.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1614.jpg)
remove the calipers remember to hang them up on cable ties ive put mine on supports it protects the pipes
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1616.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1616.jpg)
brakes removed suspension next
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1617.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1617.jpg)
suspension being removed
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1618.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1618.jpg)
passeger side removed
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1621.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1621.jpg)
inner air box removed
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1623.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1623.jpg)
start on drivers side brakes
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1628.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1628.jpg)
senser hidden away under drivers side inner wing
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1632.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1632.jpg)
brakes and suspesion off
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1633.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1633.jpg)
stub axle soaking in gunk ready for painting
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1635.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1635.jpg)
starting on TMIC
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1636.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1636.jpg)
dump valve removed
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1637.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1637.jpg)
all off quite easy
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1639.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1639.jpg)
another shot off where the intercooler was
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1643.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1643.jpg)
pic of the strut mounting
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1644.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1644.jpg)
engine bay
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1646.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1646.jpg)
drivers side removed
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1648.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project/DSCN1648.jpg)
right thats the mechnicals stripped down front anyway, so whist i was doing this i decided to do the complete interior off the car starting with seat removal and the dash.
that will be the next installment cheers mick:thumb:

Good going.

Why did you remove the front wings out of interest? Was it just for access?

Graham.

right dash in fact the whole interior of the car is getting a make over, one tip if you are just doing the dash leave the seats in. comfort is a wonderful thing

right first pics seats out
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1701.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1701.jpg)
right seats out now centre console
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1702.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1702.jpg)
start on the console screws inside the cubby hole
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1705.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1705.jpg)
never realised how dirty me bloody car was anyway gear knob and remove the console with the gaiter on it
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1706.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1706.jpg)
DCCD wiring is just snap connections little screwdriver saves the fingers
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1707.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1707.jpg)
removal exposes the next screws
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1708.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1708.jpg)
leaves everything exposed
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1710.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1710.jpg)
next glovebox screws inside snap connecters for lights
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1711.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1711.jpg)
removal of air con control panel is easy couple of screws and snap connecters reveals the audio system
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1713.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1713.jpg)
lots of wiring
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1714.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1714.jpg)go audio system is not standard. dvd will have to go. ill have to find something to fit in the single din
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1716.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1716.jpg)
exposes the screws for the little panel with the two air vents and four way flashers
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1717-1.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1717-1.jpg)
remove the centre console
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1718.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1718.jpg)
remove panel drivers side exposes fuse box
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1719.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1719.jpg)
next airbag. battery off the vehicle think they recommend 20 mins but i left it ages. two screws in back of centre cap about 5mm multi screw, not sure what the term is but i will photo it and put it on
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1720.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1720.jpg)
airbag store in a cool dry place
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1723.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1723.jpg)
top of steering column
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1724.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1724.jpg)
rght removal of the top cover on the steering column is fixed with a snap fit on the back and 2 hard to see screws underneath
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1725.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1725.jpg)
this lets you take the cover on the dash panel two screws and two push fit snap fittings it exposes lots of wiring, but most is not involved so should not put you off
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1727.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1727.jpg)
fuse box close up
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1729.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1729.jpg)
messed about quite a bit trying to figure next move mainly with the air ducting no probs here it all comes off with dash
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1731.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1731.jpg)
had a big problem witrh a couple of modules till i realised they were the tracker, aerial, receiver, sender etc but this will differ car to car
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1733.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1733.jpg)

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1734.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1734.jpg)
the air vents at the front are a snapfit and give you access to everything
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1736.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1736.jpg)

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1737.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1737.jpg)
as you can see from the picture above the air bag has been removed i will post pics when i refit it
one of two hidden screws holding the dash underneath the air vent panel
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1738.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1738.jpg)
dash is removed and all is revealed
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1740.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1740.jpg)

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1741.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1741.jpg)
some of the parts for flocking

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1742.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1742.jpg)

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1743.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1743.jpg)
as i said full interior is getting a face lift some will like it some wont
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1839.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1839.jpg)

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1841.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1841.jpg)

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1842.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1842.jpg)

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1843.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1843.jpg)

right most of my stuff has been flocked but will not be revealed just yet. cbc services in banbury are doing it mick nikki and chris have been great. we picked up the flocking on friday when the rain from hell fell on that area it took nine hours to get home and consider ourselves very lucky. best wishes to all those people exposed to that downpour and we hope you get your houses sorted soon. no doubt some on scoobynet will be involed
i will start putting the car back together inside first mick:thumb:

Good going.

Why did you remove the front wings out of interest? Was it just for access?

Graham.

i wanted the access and they are so easy to get off. plus get some proper underseal on exposed areas. not great subaru
cheers graham
see the interior section posted as well
mick

:thumb:

Been eating M&S biscuits whilst you work in there;)

Gonna be awesome when complete

blooming hell, nothing like doing it all in one go is there :norty:

great pics and write up :thumb:

looking like your a very busy person,going to look mint when done,keep the updates coming

:thumb:

Been eating M&S biscuits whilst you work in there;)

Gonna be awesome when complete

m&s biscuits absolutly the car is starting to go back together as some of the flocked gear is back update soon
mick lol

blooming hell, nothing like doing it all in one go is there :norty:

great pics and write up :thumb:
thanks mark took a big challenge this time all on me own will be regular updates
mick :thumb:

Bloody Hell mate, talk about grabbing the bull by the horns.

Best of luck with it all, I'll keep an eye on this :thumb:

looking like your a very busy person,going to look mint when done,keep the updates coming
thanks jez
updates will be regular thing out in the garage today, couple wiring issues to sort out. also want something single din maybe a ecutek unit or something like i want it all to be useable but to look the dogs
cheers mick.:thumb:

very interesting micheal. will follow with (inserts another word for interest):norty:

Bloody Hell mate, talk about grabbing the bull by the horns.

Best of luck with it all, I'll keep an eye on this :thumb:
andy
got bored thought i know i will take the car apart, got the flocked dash back awesome will post pics in due time
ella and the girls ok
mick and gill:) :)

very interesting micheal. will follow with (inserts another word for interest):norty:
allright andy keeping busy m8 :norty:

allright andy keeping busy m8 :norty:

me too fella;)

first pic is the dash second glove box and airbag cover
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1847.jpg

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1854.jpg

they are the dogs boll-cks
i will keep the updates coming
cheers mick :)

first pic is the dash second glove box and airbag cover
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1847.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1847.jpg)

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1854.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1854.jpg)

they are the dogs boll-cks
i will keep the updates coming
cheers mick :)

mick, to a novice such as myself, can you explain what flocking is and involvs, and reasons (other than visual) for doing it. looks really good, but ive wondered why wrc teams use it.:wonder:

mick, to a novice such as myself, can you explain what flocking is and involvs, and reasons (other than visual) for doing it. looks really good, but ive wondered why wrc teams use it.:wonder:

andy
dont quote me but here goes
1 wrc teams use it for its anti glare propeties it totally stops the reflection of the dash in the windscreen
2 the process is a glue put on the panel and a electrically charged nylon particals fired at it. any porous surface can be done
3 the second pic of the glove box, dont do it justice, it is jet black very hard wearing and looks the dogs nuts, remember best of show winner at the NBO had a flocked dash
hope that helps someone will come on and give better details
cheers mick:thumb:

Looking good Mick :thumb:

It's good to see some newages in the projects section...

Looking good Mick :thumb:

It's good to see some newages in the projects section...

yeah some would say mad on an 05 sti but had the chance to do it and thought sod it
cheers mick

Good to meet you today Mick :thumb:

About time you gave us an update...;)

Neil.

Looks a good project to keep you busy, just out of interest, why are you not doing the anti-lift kit and droplinks yourself, a very easy job to do

looking like a big expensive project!

Looking forward to seeing the finished result!

S!

Good to meet you today Mick :thumb:

About time you gave us an update...;)

Neil.
hi neil
the feelings mutual i will update the post at the end the week, a lot of stuff is at CBC, which you know suffered badly in the floods but i think i can c do enough work this week to warrent a post.
thanks for the splitter m8 i know you went to great lengths to get me it and it is appreciated. i hope that we me getting involved in the modifier/showcar scene i think i will be using your services sometime in the near future
mick :thumb:

hi neil
the feelings mutual i will update the post at the end the week, a lot of stuff is at CBC, which you know suffered badly in the floods but i think i can c do enough work this week to warrent a post.
thanks for the splitter m8 i know you went to great lengths to get me it and it is appreciated. i hope that we me getting involved in the modifier/showcar scene i think i will be using your services sometime in the near future
mick :thumb:


ah good good, keep us posted dude.

Looks a good project to keep you busy, just out of interest, why are you not doing the anti-lift kit and droplinks yourself, a very easy job to do
i think the answer to that was i was feeling lazy. had no idea how they fit and have since got my head sorted. also got some better axle stands so i feel a lot safer under the car now.
cheers mick

looking like a big expensive project!

Looking forward to seeing the finished result!

S!

hi expense yes going be in the region of ten grand. thats if i do everything i want to do. and some things not on the list. i want the scoob to look the dogs dangles with plenty of power,brakes and handling to match. the interior will be stunning i hope
cheers mick
hoping to have it all done by next NBO :norty:

:o i cant beleive your ripped out all the dash, you brave daft crazy person lol :D

i have not got time to do a full update so here is a couple of pics for those who like and those that dont i dont mind.
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1923.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1923.jpg)

door card not yet finished
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1928.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1928.jpg)

i knew i could get that dash back in lol
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1922.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1922.jpg)

full update will follow soon some flocked parts below

http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1861.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1861.jpg)
zero sports triple pod to be flocked yet
http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1877.jpg (http://i4.photobucket.com/albums/y107/mickyjeff/micks%20scooby%20project%20interior/DSCN1877.jpg)
cheers mick

looks :cool: great project!

love the dash:thumb: