Race car look on a budget
25 December 2012, 08:42 PM
#1
Race car look on a budget
Picked up this 1996 wrx a while ago was real rough round the edges but with a bit of time on my hands decided to build a race car look on a budget,
It's currently running 368bhp on a 2.1 stroker engine with a 6 speed box in need of a map once I get bigger injectors will be getting JGM in :-),
As it stands its a working project that 99% has been done by myself in my spare time so it's not near the finished article.
Then managed to get a ABW rear diffuser and made some stiffis, exhaust has now been tidied up and not so low,
Then on to the front end made up a splitter and fitted induction feed kit,
,
Fitted bonnet pins and raised the rear up a bit to allow better air flow,
,
Started making full roll cage to fia spec,
,
ABW arches and spacers on the way with a set of these wheels i am so in love with the colour and car off for full respray in 5wks to tidy it up round the edges,
,
Loads more to do and in total I have spent the grand sum of £350 minus wheels and arches :-).
It's currently running 368bhp on a 2.1 stroker engine with a 6 speed box in need of a map once I get bigger injectors will be getting JGM in :-),
As it stands its a working project that 99% has been done by myself in my spare time so it's not near the finished article.
Then managed to get a ABW rear diffuser and made some stiffis, exhaust has now been tidied up and not so low,
Then on to the front end made up a splitter and fitted induction feed kit,
,Fitted bonnet pins and raised the rear up a bit to allow better air flow,
,Started making full roll cage to fia spec,
,ABW arches and spacers on the way with a set of these wheels i am so in love with the colour and car off for full respray in 5wks to tidy it up round the edges,
,Loads more to do and in total I have spent the grand sum of £350 minus wheels and arches :-).
let me know when jgm is coming might get him to do mine too. Tim
Trending Topics
25 December 2012, 10:42 PM
#12
No idea if you can buy them, I made mine from scratch total cost with bars £19.50. If you have a company that publish books ask them as its used to protect the books whilst on a pallet ;-).
Last edited by howes124; 25 December 2012 at 10:48 PM.
26 December 2012, 07:51 AM
#13
26 December 2012, 10:04 PM
#22
Scooby Regular
Join Date: Mar 2011
Location: Lisburn
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
26 December 2012, 10:09 PM
#24
I can make as many as wanted from 12mm ply and supply all the brackets to fit the original holes, I have had mine way over 100mph and didn't budge a inch, but getting hold of the plastic on a large scale I will have to have a quiet word with my m8 ;-).
