When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got a replacement bumper on its way from Matty so just wanted to check for any hidden fixings when replacing it.
Easy job? Anything to watch out for?
Thanks
Four 12mm bolts in boot behind the plastic trim panel, remove tail lights out to show clips, clip on each side by the wheel arch and 5 clips underneath the bumper. I suggest buying some spare clips as some WILL break. Cheap as chips on eBay!
Location: Somewhere in Kent, sniffing some V-Power
Posts: 15,029
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BLU
Four 12mm bolts in boot behind the plastic trim panel, remove tail lights out to show clips, clip on each side by the wheel arch and 5 clips underneath the bumper. I suggest buying some spare clips as some WILL break. Cheap as chips on eBay!
22 April 2014, 03:22 PM
Newage rear bumper removal
