I've got an ongoing major clutch problem going on another thread at the mo, but looking in here, I just got to thinking - what should I see when I look at the pedal? I can see a small 'buffer' spring to stop the pedal banging against the stop when you bring the pedal up. There's also the larger spring towards the back and higher up which pivots as the pedal goes up and down, so it helps push the pedal down to half way and also helps bring the pedal up from the floor to half way. Are these the only two springs on the clutch pedal assembly itself? I keep wondering if my weird pedal feel is because one is missing from the assembly and has pinged off or something. I know about the springs in the master and slave cylinders and on the clutch release lever.