RCM 400 bhp KIT wrx or STI
07 March 2009, 08:12 PM
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
RCM 400 bhp KIT wrx or STI
1 RCM gt35 p18 turbo ( garret based standard position turbo similar to the 321h )
4 RCM supplied PE 650 injectors
1 RCM manifold with uppipe
1 Psi3 ecu monitor
These have come off my wrx due to having a new RCM engine fit which could handle more power - turbo run at 1.4 bar and done very litle miles
These came of my bugeye wrx and all purchased new
See my project thread for full details
https://www.scoobynet.com/projects-40/490419-week-fun.html
£1000 for the lot plus postage ,
To fit this kit to a standard wrx or sti you will also need a induction pipe and filter, a turbo fitting kit, new manifold gaskets and a full exhaust system all available from RCM
I will not be splitting for a good while
I have been on snet for a good number of years and would like to think I am a trusted member, no time wasters and no offers - RCM kit is normally seen as the best money can buy , this is no different
Rich
4 RCM supplied PE 650 injectors
1 RCM manifold with uppipe
1 Psi3 ecu monitor
These have come off my wrx due to having a new RCM engine fit which could handle more power - turbo run at 1.4 bar and done very litle miles
These came of my bugeye wrx and all purchased new
See my project thread for full details
https://www.scoobynet.com/projects-40/490419-week-fun.html
£1000 for the lot plus postage ,
To fit this kit to a standard wrx or sti you will also need a induction pipe and filter, a turbo fitting kit, new manifold gaskets and a full exhaust system all available from RCM
I will not be splitting for a good while
I have been on snet for a good number of years and would like to think I am a trusted member, no time wasters and no offers - RCM kit is normally seen as the best money can buy , this is no different
Rich
Last edited by WRX_Rich; 07 March 2009 at 10:52 PM.
07 March 2009, 10:49 PM
#5
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
half the reason I want to sell together is I know its all good, I don't want the usual come back "the turbo you sold is dodgy" , then you find out it was their injectors headers etc
saldy scoobynet members are not all what they used to be
08 March 2009, 01:31 AM
#7
Scooby Regular
iTrader: (4)
Join Date: Jun 2005
Location: South Wales, Scoobless, Type R is gone!
Posts: 3,618
Likes: 0
Received 0 Likes
on
0 Posts
Good price for the package 
No good for me though as the injectors are the wrong version and i already have a RCM manifold.
Would be interested in the PSI3 and possibly the turbo if u decide to split.
No good for me though as the injectors are the wrong version and i already have a RCM manifold.
Would be interested in the PSI3 and possibly the turbo if u decide to split.
Trending Topics
08 March 2009, 03:50 PM
#8
Scooby Regular
iTrader: (8)
Join Date: Jan 2006
Location: MK
Posts: 4,931
Likes: 0
Received 0 Likes
on
0 Posts
hi mate do you no if that turbo would be ok with 350 or is it going to be ott for that use, planning on going for 500 bhp over time with RCM but 1st step was fmic motec and a cheap 2nd turbo before i do the gearbox next year ??? if so i will have a talk to olly, are they still on the car ??? could leave them with rcm if so ?
08 March 2009, 07:36 PM
#9
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
hi mate do you no if that turbo would be ok with 350 or is it going to be ott for that use, planning on going for 500 bhp over time with RCM but 1st step was fmic motec and a cheap 2nd turbo before i do the gearbox next year ??? if so i will have a talk to olly, are they still on the car ??? could leave them with rcm if so ?
this is the kit I used before I had the RCM "500" package if there is a better word for it
the kit was removed by RCM a few weeks ago, send Olly an email he knows my car very well and sure he would have no problem fitting for you
Rich
09 March 2009, 12:38 PM
#12
Scooby Regular
iTrader: (8)
Join Date: Jan 2006
Location: MK
Posts: 4,931
Likes: 0
Received 0 Likes
on
0 Posts
not sure what you mean with "350" but I ran this kit on a standard bugeye engine and gear box for sometime
this is the kit I used before I had the RCM "500" package if there is a better word for it
the kit was removed by RCM a few weeks ago, send Olly an email he knows my car very well and sure he would have no problem fitting for you
Rich
this is the kit I used before I had the RCM "500" package if there is a better word for it
the kit was removed by RCM a few weeks ago, send Olly an email he knows my car very well and sure he would have no problem fitting for you
Rich
could be perfect for what i need thanks ( sweet car )
09 March 2009, 02:17 PM
#14
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
F1 cje uk
I will hold these for you as you were the first to PM me, If I hear nothing after a week pickle has the next chance
I will let others know who have sent me pm's if things change
Cheers
I will hold these for you as you were the first to PM me, If I hear nothing after a week pickle has the next chance
I will let others know who have sent me pm's if things change
Cheers
09 March 2009, 06:17 PM
#18
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Feb 2003
Location: Worcester
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
check out the project thread
https://www.scoobynet.com/projects-4...-week-fun.html
scoobyclinic rollers gave 386bhp which was my bench mark rollers, have seen over 400 on others
if I was honest my car never behavied it self on the rollers but as it was fine on the road I never really looked in to it so much
if your doing brakes make sure you do the suspension first, my worst move to date with my car was upgrading to ap 6 pots with out upgrading the dampers, this made the car very un easy under heavy braking
https://www.scoobynet.com/projects-4...-week-fun.html
scoobyclinic rollers gave 386bhp which was my bench mark rollers, have seen over 400 on others
if I was honest my car never behavied it self on the rollers but as it was fine on the road I never really looked in to it so much
if your doing brakes make sure you do the suspension first, my worst move to date with my car was upgrading to ap 6 pots with out upgrading the dampers, this made the car very un easy under heavy braking
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Car Parts For Sale
1
18 November 2015 07:49 AM
