HKS Equal Length Headers
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 1998
Location: Nr. High Wycombe, Bucks
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
HKS Equal Length Headers
Pictures here (last three in album)
http://cid-bd36971d3b291b5c.skydrive...8%24&ct=photos
Wrap is tatty, one slip joint is tack welded as the "ear" needs rewelding. The tack weld was a temporary repair, pending removal from the car, but I decided to go with new RCM headers to match my new 2.5 engine. Quality piece of kit with plenty of slip joints, 4-2-1 design, still has slightly off beat idle sound, but then sounds more like a straight four at high revs. Excellent spool, was getting 1bar at 3000rpm on a 2.0 with a TD05/20G
£175 ono, collection preferred, otherwise I will have to dismantle to post them!
http://cid-bd36971d3b291b5c.skydrive...8%24&ct=photos
Wrap is tatty, one slip joint is tack welded as the "ear" needs rewelding. The tack weld was a temporary repair, pending removal from the car, but I decided to go with new RCM headers to match my new 2.5 engine. Quality piece of kit with plenty of slip joints, 4-2-1 design, still has slightly off beat idle sound, but then sounds more like a straight four at high revs. Excellent spool, was getting 1bar at 3000rpm on a 2.0 with a TD05/20G
£175 ono, collection preferred, otherwise I will have to dismantle to post them!
Last edited by Stuart Knight; 17 March 2009 at 08:12 AM.
#3
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 1998
Location: Nr. High Wycombe, Bucks
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
Been on my car about 4 years, under wrap! Covered about 15000 miles. Try this link:
http://cid-bd36971d3b291b5c.skydrive...8%24&ct=photos
http://cid-bd36971d3b291b5c.skydrive...8%24&ct=photos
Last edited by Stuart Knight; 17 March 2009 at 09:28 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM