Newage decat up-pipe
03 May 2009, 08:53 AM
#1
Scooby Senior
Thread Starter
iTrader: (51)
Join Date: Nov 2005
Location: Wherever I park my car, that's my home
Posts: 20,491
Likes: 0
Received 2 Likes
on
2 Posts
Newage decat up-pipe
As it says, one stainless steel decat up-pipe with gaskets.
I planned to fit this, but having seen the state of my headers have decided to replace the lot as a oner with a matched set of either tubular or ported headers.
This has never been fitted. A great upgrade for WRXs that have a pre-cat in the up-pipe. This eliminates any chance of the pre-cat breaking up and being ingested into the turbo as well as improving the cars breathing.
It is a 2.5" pipe although the flange at the turbo end only has a 2" opening. There is plenty of overlap on this flange so either a good mechanic or machineshop should be able to open this up to the full 2.5" without compromising the weld.
Looking for £40 plus delivery.
Delivery options are £8 - 1st class recorded or £5 via royal mail standard parcels (not signed for).
I planned to fit this, but having seen the state of my headers have decided to replace the lot as a oner with a matched set of either tubular or ported headers.
This has never been fitted. A great upgrade for WRXs that have a pre-cat in the up-pipe. This eliminates any chance of the pre-cat breaking up and being ingested into the turbo as well as improving the cars breathing.
It is a 2.5" pipe although the flange at the turbo end only has a 2" opening. There is plenty of overlap on this flange so either a good mechanic or machineshop should be able to open this up to the full 2.5" without compromising the weld.
Looking for £40 plus delivery.
Delivery options are £8 - 1st class recorded or £5 via royal mail standard parcels (not signed for).
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM