For Sale: Chromed Classic Inlet Manifold
#1
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: Jan 2007
Location: Clacton
Posts: 1,657
Likes: 0
Received 0 Likes
on
0 Posts
For Sale: Chromed Classic Inlet Manifold
Hi guys,
I'm selling my chromed classic inlet manifold, its an early manifold for the V2's and some V3's.
I sent it off to get mirror polished (all the orange peel casting marks removed) and then chromed. I'm not sure what happened along the way but what I asked for isn't what I got.
The inlet was only part polished. The underside and injector points were not polished (These won't be seen when it is fitted) the seems ontop of the inlet and the difficult areas behind the air mounts were not polished either. So the orange skin effect remains.
The company I then chromed over the top of it.
On the whole its a good looking bit of kit, the flat areas are nice and bright but the chromed patchs of orange peel do let it down.
It cost me a lot to get it done and I will be making a loss in selling it.
The pictures below do not capture the orange peel effect I tried but because the chrome is so bright it proved impossible.
I'd rather the buy came to collect, one to see it in the flesh and two to prevent it from being damaged in transit.
Open to all sensible offers
I'm selling my chromed classic inlet manifold, its an early manifold for the V2's and some V3's.
I sent it off to get mirror polished (all the orange peel casting marks removed) and then chromed. I'm not sure what happened along the way but what I asked for isn't what I got.
The inlet was only part polished. The underside and injector points were not polished (These won't be seen when it is fitted) the seems ontop of the inlet and the difficult areas behind the air mounts were not polished either. So the orange skin effect remains.
The company I then chromed over the top of it.
On the whole its a good looking bit of kit, the flat areas are nice and bright but the chromed patchs of orange peel do let it down.
It cost me a lot to get it done and I will be making a loss in selling it.
The pictures below do not capture the orange peel effect I tried but because the chrome is so bright it proved impossible.
I'd rather the buy came to collect, one to see it in the flesh and two to prevent it from being damaged in transit.
Open to all sensible offers
Last edited by jiffthejiffmanjaffa; 25 June 2009 at 08:59 PM.
#7
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: Jan 2007
Location: Clacton
Posts: 1,657
Likes: 0
Received 0 Likes
on
0 Posts
Couple of people nippling asking what sort of money I will take for it, but no offers yet. She's still up for grabs.
It owes me a lot of money far more than I'm going to recoup. £100 or near offer. Make an offer and see what I say you never know, my Misses may make me accept it, ha ha.
It owes me a lot of money far more than I'm going to recoup. £100 or near offer. Make an offer and see what I say you never know, my Misses may make me accept it, ha ha.
Trending Topics
#13
Scooby Regular
Thread Starter
iTrader: (10)
Join Date: Jan 2007
Location: Clacton
Posts: 1,657
Likes: 0
Received 0 Likes
on
0 Posts
As for the pipe question, its a phase 1 inlet so the pipe goes behind it. I've no idea if it will fit the later set up, but I have seen this manifold on younger cars so I guess it is possible but how it is done I've no idea.
Best look that up on another thread or start a thread of your own to be sure. So one on here will know and have done it before.
#14
Scooby Regular
iTrader: (9)
Join Date: Sep 2008
Location: Kobenhagen, Denmark
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Thanks... My wrx are from 95, and has fase1 inlet
Can U arrange the shipment, perhaps with DPD?
I will be on hollieday in week 30, so eighter before or after, so it wont be sendt back..
Lars
Can U arrange the shipment, perhaps with DPD?
I will be on hollieday in week 30, so eighter before or after, so it wont be sendt back..
Lars
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
bluebullet29
General Technical
9
05 October 2015 02:17 PM