VF35, STI8 inter, whiteline, APEXI fc, ETC
03 September 2009, 08:14 PM
#1
Scooby Regular
Thread Starter
iTrader: (28)
Join Date: Dec 2006
Location: back of beyond(but nice roads;)
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
VF35, STI8 inter, whiteline, APEXI fc, ETC
hi, all parts removed from my98 ver4 classic, due to upgrade.
VF35 approx 28k, only run to 1.3bar.no smoke or play. Been ported on wastegate to stop boost creep as per floyds economy thread, (thanks floyd) £300. SOLD
STI 8 top mount modified as per carl davey site for version 3/4, end caps have been removed and sealed and this has been pressure tested to 2 bar with no leaks, comes with all brackets silicone pipe etc to fit. very good nick, £200
apexi FC sold MAFSIM still available also comes with MAFSIM purchased recently from here but not used as upgrading ecu now. £75
exedy organic pink box clutch complete and lightened standard flywheel (3kg less), not sure on miles (about 1mm to rivets?) as bought secondhand from a well known member who purchased clutch from lateral,flywheel needs a skim as some judder on downchange, hence £150.
3 port solenoid, £25
purple maf £40
http://i301.photobucket.com/albums/n...3092009712.jpg
whiteline parts:-
ALK £100 sold
roll centre kit 2 track rod ends/2 bottom ball joints fitted in march. £95 sold
alloy wishbones with polybushed front bushes, £100, sold
http://i301.photobucket.com/albums/n...2092009710.jpg
3" exhaust jap style exit with bung and heat wrapped downpipe, couple of scuffs on underside, £150
http://i301.photobucket.com/albums/n...9082009708.jpg
based in devon for pick up, can arrange courier if needed.
can supply other photos/info.
paypal fees extra.
thanks steve.
VF35 approx 28k, only run to 1.3bar.no smoke or play. Been ported on wastegate to stop boost creep as per floyds economy thread, (thanks floyd) £300. SOLD
STI 8 top mount modified as per carl davey site for version 3/4, end caps have been removed and sealed and this has been pressure tested to 2 bar with no leaks, comes with all brackets silicone pipe etc to fit. very good nick, £200
apexi FC sold MAFSIM still available also comes with MAFSIM purchased recently from here but not used as upgrading ecu now. £75
exedy organic pink box clutch complete and lightened standard flywheel (3kg less), not sure on miles (about 1mm to rivets?) as bought secondhand from a well known member who purchased clutch from lateral,flywheel needs a skim as some judder on downchange, hence £150.
3 port solenoid, £25
purple maf £40
http://i301.photobucket.com/albums/n...3092009712.jpg
whiteline parts:-
ALK £100 sold
roll centre kit 2 track rod ends/2 bottom ball joints fitted in march. £95 sold
alloy wishbones with polybushed front bushes, £100, sold
http://i301.photobucket.com/albums/n...2092009710.jpg
3" exhaust jap style exit with bung and heat wrapped downpipe, couple of scuffs on underside, £150
http://i301.photobucket.com/albums/n...9082009708.jpg
based in devon for pick up, can arrange courier if needed.
can supply other photos/info.
paypal fees extra.
thanks steve.
Last edited by reddishblue; 15 September 2009 at 07:16 AM.
03 September 2009, 09:40 PM
#3
03 September 2009, 10:36 PM
#7
Scooby Regular
iTrader: (5)
Join Date: May 2009
Location: Kirkcaldy, Fife
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Do you take paypal?? Fancy sending the TMIC for £200 inc postage and I'll pay tonight? I am getting my powerfc fitted and mapped next Friday so would need it posted tomorrow if poss though!!
Trending Topics
04 September 2009, 01:29 PM
#9
Scooby Regular
iTrader: (23)
Join Date: May 2006
Location: Rota Subzeros FOR sale!
Posts: 3,701
Likes: 0
Received 0 Likes
on
0 Posts
Interested in the roll centre kit 2 track rod ends/2 bottom ball joints fitted in march. £95
can you give me until tonight to confirm if i'm going to take them or not?
Thanks
Ricey
can you give me until tonight to confirm if i'm going to take them or not?
Thanks
Ricey
