*** V5/6 TMIC with alloy Y-pipe & mounting Brackets ***
06 January 2010, 04:49 PM
#1
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: May 2006
Location: Middx / Herts / Bucks / Essex
Posts: 3,420
Likes: 0
Received 1 Like
on
1 Post
*** V5/6 TMIC with alloy Y-pipe & mounting Brackets ***
I have for sale a V5/6 TMIC in very good condition which would make a nice upgrade for earlier classics. Complete with alloy Y-pipe and mounting brackets + bolts... AND oem dump valve, not pictured as I totally forgot to include it in the original post... AND bonnet under tray if required.
The fins have taken the usual amount of stone dents from motorway driving.
£100
The fins have taken the usual amount of stone dents from motorway driving.
£100
Last edited by alex_00s; 17 January 2010 at 11:24 AM.
07 January 2010, 12:34 PM
#3
Scooby Regular
iTrader: (4)
Join Date: Apr 2009
Location: Making noise in Scotland
Posts: 805
Likes: 0
Received 0 Likes
on
0 Posts
Thats a good price, I fitted one of these to my V2 STI and it made a noticeable drop to the inlet temperature, stronger boost from low down and it's a great upgrade for future power gains!!. Highly recommended if like me you dont want to go down the fmic route.
Free Bump!!
Free Bump!!
07 January 2010, 05:51 PM
#4
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: May 2006
Location: Middx / Herts / Bucks / Essex
Posts: 3,420
Likes: 0
Received 1 Like
on
1 Post
Thanks for the comments 
I know a couple ppl that have done exactly as you and gone for this tmic rather than fmic. It saves so much more expense of the fmic and all the other things you have to do like chop up the front bumper etc...
Most importantly I've got the mounts coz these are vital and sometimes ppl sell their old tmic's without these. Last thing you wanna do is start fannying around fabricating or sourcing mounts.
I know a couple ppl that have done exactly as you and gone for this tmic rather than fmic. It saves so much more expense of the fmic and all the other things you have to do like chop up the front bumper etc...
Most importantly I've got the mounts coz these are vital and sometimes ppl sell their old tmic's without these. Last thing you wanna do is start fannying around fabricating or sourcing mounts.
Trending Topics
10 January 2010, 06:40 PM
#8
18 January 2010, 10:39 PM
#15
Scooby Regular
iTrader: (15)
Join Date: Feb 2009
Location: Middlesex home to the MSOC :0)
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Intersted mate but not sure about my dump valve as I'm running the hks ssqv does anyone know if it will fit on this tmic without modifictions etc
19 January 2010, 07:00 PM
#17
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: May 2006
Location: Middx / Herts / Bucks / Essex
Posts: 3,420
Likes: 0
Received 1 Like
on
1 Post
As long as you got the correct flange it'll fit... I can get hold of a brand new genuine HKS flange for this tmic for you for ~£20 and in the mean time you could use the oem dump valve I'm giving away with this?
Could even drop it all down to you at the MSOC meet
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM