ryanaircon

iTrader: (3)

Breaking 3 classics / Wagon with performance parts VER 4 ENGINE AVAILABLE + TD05 20G
All parts available. . PM or Call me on 07977 036 032


Below is a list of all the performance parts available for the classic shape impreza :-




ENGINE / Components

1997 WRX Ver 4 with 1 month warranty £495.00

Induction Kits
1x Pipercross air filter kit VER 3/4 - £25.00
1x K & N filter kit VER 1/2 - £35.00
1 x K&N Panel filter Ver 3-4-5-6 £20.00
1x Apexi Power Intake Ver 1-2-3-4 £50.00

Intercoolers
1x Front mount intercooler and hard pipe kit £150.00
1 x Mocal Oil cooler + sandwich plate £ 60.00

Fueling
Adjustable Fuel Pressure Reg + Gauge £40.00
Walbro 255Ltr Pump + Sender unit £40.00

Turbos
TD05 20G Turbo £395.00
IHI VF 24 £150.00

Exhausts
Ninja bell mouth De-cat pipe £75.00
Feral Racing T304 Stainless inc ( Heat wrapped headers/up pipe/Bell mouth Decat
Full 3" bore with 4" slash cut tail pipe 2 years old with recipt Cost £550) £295.00

Guages

2x Auto Guage Mechanical Boost guage £15.00 each
N/S Electronic Boost guage with Peak hold function JDM £40.00

Boost Controllers

1x Blitz Dual - SBC + sensors and wiring £145.00

BOV's
1x Bailey twin piston type dumpvalve £40.00

ECU'S
Apexi Power FC + Controller + AVCR Ver 3-4-5-6 £475.00
Ver 2 WRX Import Standard ECU £ 40 .00
Ver 3 WRX Import Standard ECU £ 40.00
Ver 4 WRX UK Standard ECU £ 40.00

Alloy Crank Pulley Lightweight £20.00


GEAR BOXES

Import 1996 Ver 3 TY752VBCAA + Diff £295.00
Import 1995 Ver 2 TY752VB3FA + Diff £295.00


SUSPENTION

1x Juran alloy front strut brace £ 50.00
1x STI Fuji Industires carbon fibre front strut brace £ 75.00
2 x STi RA full suspension setups £100.00 per set
KYB Shocks and 40 mm lowering springs £120.00

BRAKES

Subaru 4 pot front brake calipers + Drilled / Grooved Discs +pads As new cond £225.00
2x Impreza 2 pot type R rear brake calipers + discs + pads £175.00


SEATS / INTERIOR

2x STI Ver 3/4 Front seats with red shoulders - £155.00
2x STI Type R Ver 5/6 Front seats with red shoulders upper/lower £195.00
1x STI Nardi steering wheel VER 3/4 - £ 30.00
1x STI Nardi steering wheel VER 1/2 £ 20.00
1x MOMO leather steering wheel + air bag VER 5/6 £ 60.00
WRC Alloy Gear **** and Pedals £ 15.00
2x Center consol with armrest / compartment £ 30.00 each

PANELS / BONNETS

1x STI Alloy bonnet VER 1/2 inc Vents £ 75.00
1x STI Alloy bonnet VER 3/4 Facelift Perfect Condition 230 White inc Vents £195.00


LIGHTS
2x Facelift Headlights Genuine £ 40.00
2x Smoked sidelights + side repeaters - £ 20.00
2x Angel Eye Twin Projector Head lights inc HID Kits £120.00


ALLOYS

BUG EYE WRX Alloys Silver 215/45/17 5x100 PCD 2 new tyres £150.00
BUG EYE WRX Alloys Met Black 215/45/17 5x100 Pzeros all round £200.00

magneel1

iTrader: (18)

You Have PM

mark100

Hi can you send me details or pics of the fmic and pipes thanks

Squarepusher

You have PM

cossieboy599

interested in the front mount cooler do you have any pics

Antonyworldwide

iTrader: (5)

hi there the apexi fc and the avcr fit a uk version 6? can anyone map these? do i still use my own ecu with this? sorry for the dumb questions

ryanaircon

iTrader: (3)

Hi, yes this should fit a Ver 6 UK model, there may be a few wires that need to be changed. Most mappers are very familiar with the Apexi unit as a lot of Subarus are fitted with them. It is a complete stand alone system which replaces your ECU. The AVCR software is built into the ECU and comes with the AVCR boost solenoid. The best thing to do if you're unsure about this unit, is to put a post up on ScoobyNet.

Thanks
Ryan

ryanaircon

iTrader: (3)

hi click on the link below for your pics of the fmic:-

http://s871.photobucket.com/albums/a...mpreza%20fmic/

Hope pics are ok. Any problems just pm me.

Thanks
Ryan

BIG FUD

iTrader: (84)

yhm

Any injectors phase 1 ??

ryanaircon

iTrader: (3)

Hi yes i have a set of 95 WRX injectors £60
Thanks Ryan.

McPhie

iTrader: (2)

Where about are you?

Barracuda_82

iTrader: (3)

Do you have a camshaftpositionsensor (don't know for sure it's the correct name for it)?

ryanaircon

iTrader: (3)

Hi, i am based in Stoke on Trent.

Thanks
Ryan

ryanaircon

iTrader: (3)

hi, yes i have one £20 inc P+P.

Thanks
Ryan

Barracuda_82

iTrader: (3)

Is it working good? No dents in the surface or something?

Is the P&P including shipment to Holland?

ryanaircon

iTrader: (3)

He yes it has been removed from a good working engine, there are no dents of marks. The P&P is the the UK.
I have been given a quote of £16 + Vat to ship unless you know any where that you can get it cheaper.
Thanks Ryan.

Ian

iTrader: (10)

any pics of the oil cooler please

WRX_Pammy

yhpm