Some Parts From My Blobeye Spec C
#1
Scooby Regular
Thread Starter
iTrader: (100)
Join Date: Oct 2008
Location: Planet Earth
Posts: 13,684
Likes: 0
Received 0 Likes
on
0 Posts
Some Parts From My Blobeye Spec C
I have the following parts for sale which were recently removed from my JDM Blobeye Spec C when it had an engine rebuild / uprate and some other modifications.
Zerosports Radiator Deflector Panel
This was developed by Zerosports in order to deflect air flow down onto the radiator from the top of the slam panel in order to improve cold air flow to the radiator.
It is in good condition as you can see from the photograph and is literally a five minute modification in order to fit.
£50 inc postage to Mainland UK
Sold to Dave Y
Blobeye STi Scoop And Zerosports Undertray
This is a standard Blobeye STi TMIC Scoop (WR Blue Paint Code 02C) And Zerosports Blobeye STi TMIC undertray.
The Zerosports undertray was developed in order to improve air flow to the STi TMIC and the turbocharger, it certainly looks far better than the standard undertray and will only fit Blobeye STi scoops.
£150 for both including postage to Mainland UK.
Sold to BigG_WRX
RCM Induction And SPT Induction Heat Shield
RCM Air Induction Kit, developed by RCM and mounted in the engine bay - considered to be the best engine bay induction kit and a very good product. This has the 'port' required for the MAF and fits very well in the space vacated by the standard air cleaner box. These retail for around £200 on the RCM website shop.
SPT (Subaru Performance Tuning) Induction Heat Shield this is made for the American market by SPT a division of Subaru America, it blocks a lot of the hot air from the induction cone and does not require any modifications to fit. It simply fits in the engine bay using existing holes/bolts and cocoons the area so that the usual heat soak does not effect the induction filter. I imported once of these for another member of SWS and it cost £120 inc shipping and taxes.
£150 for both inc postage to Mainland UK.
RCM Induction Sold to PaulZero
SPT Induction Shield Sold to T20 Driver
SPT Induction Heat Shield still for sale.
Hyperflow Coolant Overflow Resevoir
I recently purchased this from Scoobyclinic for £95 as I believed that I would need to relocate the resevoir when I fitted an APS FMIC. It was not required in the end and was never fitted.
It is brand new and has only been removed from the packaging but is totally unmarked, unfortunately I don't have a photo to post yet but I can do so if anyone wants to see what it looks like.
£60 inc postage to the Mainland UK.
I am willing to split the items but only if both items are sold, I can accept payment by PayPal, direct bank transfer or cheque. Please note that in the case of a transfer or cheque payment that I will only post the goods out when funds have cleared into my account.
Collection is possible within the South Wales area, or I can meet provided it's not too far away.
Any questions please PM me.
Any parts posted out will be trackable and insured, as I have stated this is included in the prices listed.
Zerosports Radiator Deflector Panel
This was developed by Zerosports in order to deflect air flow down onto the radiator from the top of the slam panel in order to improve cold air flow to the radiator.
It is in good condition as you can see from the photograph and is literally a five minute modification in order to fit.
£50 inc postage to Mainland UK
Sold to Dave Y
Blobeye STi Scoop And Zerosports Undertray
This is a standard Blobeye STi TMIC Scoop (WR Blue Paint Code 02C) And Zerosports Blobeye STi TMIC undertray.
The Zerosports undertray was developed in order to improve air flow to the STi TMIC and the turbocharger, it certainly looks far better than the standard undertray and will only fit Blobeye STi scoops.
£150 for both including postage to Mainland UK.
Sold to BigG_WRX
RCM Induction And SPT Induction Heat Shield
RCM Air Induction Kit, developed by RCM and mounted in the engine bay - considered to be the best engine bay induction kit and a very good product. This has the 'port' required for the MAF and fits very well in the space vacated by the standard air cleaner box. These retail for around £200 on the RCM website shop.
SPT (Subaru Performance Tuning) Induction Heat Shield this is made for the American market by SPT a division of Subaru America, it blocks a lot of the hot air from the induction cone and does not require any modifications to fit. It simply fits in the engine bay using existing holes/bolts and cocoons the area so that the usual heat soak does not effect the induction filter. I imported once of these for another member of SWS and it cost £120 inc shipping and taxes.
£150 for both inc postage to Mainland UK.
RCM Induction Sold to PaulZero
SPT Induction Shield Sold to T20 Driver
SPT Induction Heat Shield still for sale.
Hyperflow Coolant Overflow Resevoir
I recently purchased this from Scoobyclinic for £95 as I believed that I would need to relocate the resevoir when I fitted an APS FMIC. It was not required in the end and was never fitted.
It is brand new and has only been removed from the packaging but is totally unmarked, unfortunately I don't have a photo to post yet but I can do so if anyone wants to see what it looks like.
£60 inc postage to the Mainland UK.
I am willing to split the items but only if both items are sold, I can accept payment by PayPal, direct bank transfer or cheque. Please note that in the case of a transfer or cheque payment that I will only post the goods out when funds have cleared into my account.
Collection is possible within the South Wales area, or I can meet provided it's not too far away.
Any questions please PM me.
Any parts posted out will be trackable and insured, as I have stated this is included in the prices listed.
Last edited by Cannon Fodder; 23 May 2011 at 09:51 PM. Reason: Update
Trending Topics
#11
Scooby Regular
Thread Starter
iTrader: (100)
Join Date: Oct 2008
Location: Planet Earth
Posts: 13,684
Likes: 0
Received 0 Likes
on
0 Posts
It is made from aluminium I believe it's hard to tell as it's been coated, and it has rubber strips along the contact areas.
I'd want £55 for the induction shield including delivery.
Yes I would, drop me a PM to sort out.
Last edited by Cannon Fodder; 23 May 2011 at 04:29 PM.
#16
Scooby Regular
Thread Starter
iTrader: (100)
Join Date: Oct 2008
Location: Planet Earth
Posts: 13,684
Likes: 0
Received 0 Likes
on
0 Posts
I'm fine with that drop me a PM to sort out.
Fine as the other guy hasn't responded yet and you can have it for the same price of £45.00, I'll drop you a PM with my PayPal details.
Fine as the other guy hasn't responded yet and you can have it for the same price of £45.00, I'll drop you a PM with my PayPal details.
Last edited by Cannon Fodder; 23 May 2011 at 04:33 PM.