Tial 50mm BOV / dump valve
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Tial 50mm BOV / dump valve
I have for sale a used but in good condition Tial 50mm BOV / dump vale. It comes complete with: V-band clamp,
V-band alloy weld in collor and vac / boost air signal banjo. The weld in collor has been used but cut back clean
so can be rewelded. spare weld in collors can be bought separately and cost about £10.
Some information taken from Tial's web site:
- For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.). The body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in (50.5mm) valve; we believe this is the largest valve available with the highest flow capacity.
- The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp is anodized and uses Stainless Steel hardware for a long lasting, corrosion-free appearance.
- The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance.
- The Blow Off Valve also comes with our own machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life.
This iteam cost me over £200 when bought new and is still in great condition
V-band alloy weld in collor and vac / boost air signal banjo. The weld in collor has been used but cut back clean
so can be rewelded. spare weld in collors can be bought separately and cost about £10.
Some information taken from Tial's web site:
- For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.). The body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in (50.5mm) valve; we believe this is the largest valve available with the highest flow capacity.
- The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp is anodized and uses Stainless Steel hardware for a long lasting, corrosion-free appearance.
- The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance.
- The Blow Off Valve also comes with our own machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life.
This iteam cost me over £200 when bought new and is still in great condition
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM
shorty87
Wheels And Tyres For Sale
0
29 September 2015 02:18 PM