Alan Jeffery
25 January 2008, 00:06
We've just paid the nice man, so I can tell you something about us.
Having been dyno tuning cars for the last thirty years, we have a bit of experience with these things! We tune just about any car going, as you'll see if you check our gallery out. We tend to run it like a department store, as we have so many interests.
We have a thriving and very busy Impreza department!
Apart from our four ramp light and airy workshop, we have a fully equipped machine shop with engine build clean room, and a purpose built dyno cell with a Dyno Dynamics 4wd rolling road.
Our interests in Imprezas extends to servicing and repairs as well as modifying and mapping. We are very experienced in this particular aspect, mapping Apexi, Autronics, Ecutek, Motec and especially Simtek.
We are currently the top dealer for Simtek, having supplied and mapped more than anyone else over the past year. We fitted and mapped the first customer version of the newage VVT ECU with great success.
We are factory engine builders for the Murtaya, the new Impreza based sports car which is creating so much fuss on the forums. Apparently it's too fast to race! We have been heavily involved in that project, producing engines and management systems for the demo cars, to great effect at last year's Japfest, and at TRAX, where we took 3.5 secs on the 0-60 with no driver aids.
Adrenaline Motorsport have chosen the Simtek as the factory choice of ECU for the Murtaya, which was much admired and favourably commented on at the Autosport show recently.
Our machine shop will produce top quality 2 litre and 2.5 litre engines of virtually any specification, and we have the back up to deal with any situation.
We supply a huge range of performance parts and services.
We're aware that Plymouth is a hike for a lot of you, but you'll find the travel is well worth it. :) Alan Jeffery - Engine Tuner (http://www.enginetuner.co.uk)
Having been dyno tuning cars for the last thirty years, we have a bit of experience with these things! We tune just about any car going, as you'll see if you check our gallery out. We tend to run it like a department store, as we have so many interests.
We have a thriving and very busy Impreza department!
Apart from our four ramp light and airy workshop, we have a fully equipped machine shop with engine build clean room, and a purpose built dyno cell with a Dyno Dynamics 4wd rolling road.
Our interests in Imprezas extends to servicing and repairs as well as modifying and mapping. We are very experienced in this particular aspect, mapping Apexi, Autronics, Ecutek, Motec and especially Simtek.
We are currently the top dealer for Simtek, having supplied and mapped more than anyone else over the past year. We fitted and mapped the first customer version of the newage VVT ECU with great success.
We are factory engine builders for the Murtaya, the new Impreza based sports car which is creating so much fuss on the forums. Apparently it's too fast to race! We have been heavily involved in that project, producing engines and management systems for the demo cars, to great effect at last year's Japfest, and at TRAX, where we took 3.5 secs on the 0-60 with no driver aids.
Adrenaline Motorsport have chosen the Simtek as the factory choice of ECU for the Murtaya, which was much admired and favourably commented on at the Autosport show recently.
Our machine shop will produce top quality 2 litre and 2.5 litre engines of virtually any specification, and we have the back up to deal with any situation.
We supply a huge range of performance parts and services.
We're aware that Plymouth is a hike for a lot of you, but you'll find the travel is well worth it. :) Alan Jeffery - Engine Tuner (http://www.enginetuner.co.uk)